|
|
||
| Company Profile Contact Us ACTion News Site Map Spanish | ||
|
|
|
|
|
|
|
|
Act's Sindstorm™ Fluid Bed Systems support a wide range of process applications, including: * Coating
* Drying
* Reacting* Granulation
* Heating
* Spray Drying* Agglomeration
* Cooling
* Impregnating* Mixing
* Decontaminating
Standard Features (All Models)
* Steam/coolant coil for temperature control up to 300° F
* Condensing coil for moisture removal or solvent recovery
* Mist eliminator
* Explosion protection
* Recirculating System
------ Inert gas or air operation
* Integral dust collector with polyester bag filters
------ 99% filtration efficiency for particles larger than 1 micron
* Pulse jet bag cleaning system
* Sealed discharge hopper with airlock
* On demand product discharge door
----- Push button operation
---- Air actuated
* Removable screen with your choice of open area
* Air flow and temperature controls
* Full instrumentation
----- -- Inlet air temperature
---- - Exit air temperature
---- - Fluidization air velocity indicator
------ Differential pressure gauge for filter and screen
* Complete ductwork for contained air
* Blower
----- -- Can be configured for positive, negative or atmospheric pressure
* Stainless steel construction
---- - Mill #2b finish
* Fluid bed and ductwork disassemble for easy cleaning
Optional Features and Accessories
* Alternate distributor plates (wide range of open areas available)
* Automation
- PLC automation package complete with graphic interface for control and monitoring
- System tailored to fit specific customer needs
* Cartridge filter system
* Custom filter materials* Complete spray system accessories
- Pumps, filters, nozzles, piping, etc.
- Top, bottom or side mounted
* Custom finish
* Conversion accessories for low, medium or high product density configurations
* Larger capacity discharge hopper
* Custom modifications to design, construction materials or instrumentation
Dimensions and Technical Specifications
(Standard Models)
(Cloth Area)
(244")
(177")
(225")
(25")
(160 lbs)
(5.3 ft3)
(268")
(199")
(251")
(39")
(320 lbs)
(10.6 ft3)
(294")
(244")
(359")
(54")
(700 lbs)
(24 ft3)
* Complete system, including operating and maintenance clearances. All dimensions are subject to change and are given for space estimation only.
** Disengaging Height (vertical dimension of expansion zone).
*** Indicates product density configuration: L=Low, M=Medium, H=High. All figures apply to all configurations (see next note).
† For comparison only. "L" configuration assumes product density of 30 lbs/ft3, "M" configuration assumes product density of 60 lbs/ft3, "H" configuration assumes product density of 90 lbs/ft3. Actual batch sizes will depend on your process materials. ACT will test your materials to determine the fluidization conditions and system configuration best suited to your needs. Your materials, product and process will be kept strictly confidential. We offer signed secrecy agreements upon request.
A free demonstration is available at Act's facility for clients. To discuss your project with an engineer or for more information about ACT services, including complete catalogs of ACT fluid beds and other process equipment, you may contact us by phone, fax, or email.
----
Applied Chemical Technology, Inc.
4350 Helton Drive
Florence, Alabama 35630
TEL: 256.760.9600 -- Toll Free: 800.ACT.3217
FAX: 256.760.9638
Email: act@appliedchemical.com
Web site: www.appliedchemical.com
The
Windstorm™ Fluid Bed System is the versatile, low cost solution
for batch processing and production. Windstorm™
is a complete process system, with a blower, ductwork, heating/cooling
system, integral dust collector, explosion protection and more.
Its recirculating design allows inert gas or air operation, and
the compact layout is ideally suited for sites with limited space.
